Designed to maintain uniform Temperature across the complete chamber and provide controlled environment for Heating, Curing, Drying or testing various properties under elevated temperature.
Inner Chamber Size: 18 x18 x18”
Chamber Construction: Double / Triple Walled, Inner and Outer Chamber of SS/GI/ MS/Al, made on user defined.
Ambient to 100oC / 150oC / 200oC / 250oC / 300oC / 350oC / 400oC
Thermostat, On/Off, PI, PID, Microprocessor Air Circulation:With or without air circulation Construction:
Ovens are sturdy, with double walled construction. Inner chamber made of ALUMINIUM or STAINLESS STEEL sheet.
Outer chamber is made of stainless steel or galvanized steel or mild steel sheet and are duly powder coated.
The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat losses. Inner chamber has ribs for placing the shelves at convenient levels supplied with 2 or 3 removable shelves.
The oven door is mounted on heavy hinges with a handle. Door is duly insulated Temperature Control:
Thermostat (Temperature Accuracy:+ 3OC) On/Off Control (Temperature Accuracy:+ 2OC) PID Control (Temperature Accuracy:+ 1OC) Microprocessor control (Temp. Acc: :+ 0.5OC) Note: While placing Order – Please specify the kind of controller and accuracy required at the time of ordering the Unit.
Ventilation: Air Ventilators are placed near the top of the both sides to remove hot gases & fumes if any Elements:
Heating elements are made of high quality Nichrome wire which are put inside beads & placed at the bottom and in both the side ribs for uniform temperature all over the work space. Other type of heaters like Jacket heater, Rod Heater, Sheet heaters are also available for specific requirements.
Control Panel: Comprising of switch to ON
/OFF the power, rotary switch to select high or low rates of heating, thermostat control knob and indicators for mains and thermostats supplied with cord & plug. Suitable to operate on 220 volts/50Hz, Single Phase, AC supply.
Note: We do customization as per customer/ end user requirement in our factory.