CURING CHAMBER

  • 24 Hour cycle from time of mixing.
  • Controlled 350 C or 1000 C ± 20 C Curing Temperature for concrete.
  • Controlled 270 C ± 20 C Curing Temperature for grey cement.

The tank has been designed to accommodate 150mm / 70.6mm cube moulds up to 36/72 cube mould and fully insulated, complete with a hinged lid, heater, and thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in aCompartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 350 C or 1000 C ± 20 C / 270 C +20 C , expect for the 15 minutes after immersion of the freshly made specimens.

  • Curing Tank for 6/12 moulds of 150mm / 70.6mm size
  • Curing Tank for 12/24 moulds of 150mm / 70.6mm size
  • Curing Tank for 24/48 moulds of 150mm / 70.6mm size
  • Curing Tank for 36/72 moulds of 150mm / 70.6mm size

NOTE: Accelerated curing tank with cooling arrangement is also available of request.

    Leave a Reply

    Your email address will not be published.